Central alarm receiver CU4000s
Central alarm receiver CU4000s is one of the main devices of radio frequency part of the system RS4000s.Price: 0.00 EUR w/o VAT
The central alarm receiver provides:- Receiving of data from object devices and repeaters;
- Primary processing of the messages;
- Printing of the messages;
- Indication of the messages;
- Transmission of the messages to the computer (APM operator).
General technical data and characteristics: - The central alarm receiver can be used both with personal computer and separately.
- The central alarm receiver has a serial port with the interface RS-232 for communication with computer. The transmission of the received data by the central alarm receiver is supported by this port, as well as programming of the central alarm receiver itself and controlling its work from computer;
- The central alarm receiver has a parallel port for printer installation. It is possible to print out all received messages by the central alarm receiver;
- Model CU4000s has LCD display to display received messages in off-line mode as well as for displaying diagnostic and system information.
- Using 16 buttons of the keyboard is possible to control the performance of the central alarm receiver and program its parameters;
- The central alarm receiver has modular structure, which adds greatly to its functions and allows to create an optimal configuration for each particular task;
- The main part of the central alarm receiver is the processor module with the cross board. The processor module with the power unit are set in a safe metallic block;
- The power supply ensures the work of the central alarm receiver from 220V/50Hz alternating current source or, if not powered, from built-in backup accumulator.
- The time of work from accumulator is from 10 to 20 hours depending on the number and type of the modules in use. Information capacity of each receiver out of 8 is up to 4095 addresses.
|